Factory Supplier Automatic Plastic Bottle Blow Moulding Machine With PLC Control
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
Technical parametre
| Item |
General Infomation |
|
| Container |
Theoretical Output |
2000pcs/hr |
| Max.container volume |
2L |
| Max.neck diameter |
45mm |
| Max.container diameter |
175mm |
| Max.container height |
350mm |
| Number of cavity |
2 Cav |
| Electrical System |
Total Power |
30kw |
| Use Power |
25kw |
| Air System |
Working Pressure |
1.0Mpa |
| Low Pressure Consuming |
1600L/min |
| Blow Pressure |
≤3.5Mpa |
| High Pressure Consuming |
2400L/min |
| Chiller Water |
Opreating Pressure |
0.3-0.5Mpa |
| Temperature |
10-12°C |
| Flow Rate |
45L/min |
| Machine |
Machine Dimension |
2.5*2.0*2.0m |
| Machine Weight |
1900kg |
| Feeding Machine Dimension |
2.0*1.0*2.0m |
| Feeding Machine Weight |
2000kgs |
1. PET material because of its exceptional performance, are generally used two-step molding process, by the preform injection molding machine to produce a 24-hour After cooling, the internal molecular structure of their re-arranged in an orderly manner, and blowing for the next step to create good conditions, so that more excellent blowing performance products. Such as the famous Coca-Cola Company is currently using this technology. Its production processes are as follows:
PET materials→Dryer→Injection machine(with Chiller)→Bottle Proferms
2. Cap on in the injection molding machine is completely automated production, its production process is as follows:
PP/PE material→load material→dry→heat material →injection→cooling molding →preforms→caps
