Low Price High Quality Full Automatic Bottle Blow Molding Machine For 200-2000ML PET Bottle
|
RM-2000
|
|
MOLDING
|
Clamping force
|
kg
|
1600
|
|
Clamping stroke
|
mm
|
125
|
|
Stretching stroke
|
mm
|
350
|
|
Bottom Stroke
|
mm
|
30-70
|
|
Cavity pitch
|
mm
|
120
|
|
Number of Cavity
|
Cavities
|
2
|
|
CONTAINER
|
Max.container volume
|
itr
|
1.5
|
|
Neck diameter range
|
mm
|
18-38
|
|
Max.container diameter
|
mm
|
115
|
|
Max.container height
|
mm
|
320
|
|
Carriage unit
|
pcs
|
58
|
|
THEORETICAL OUTPUT
|
bph
|
2000
|
|
ELECTRICAL SYSTEM
|
Total power
|
kw
|
30
|
|
Heating power
|
kw
|
10
|
|
Max.heating power
|
kw
|
24
|
|
AIRSYSTEM
|
Operating pressure
|
kg/cm2
|
7
|
|
Air consuming
|
Itr/min
|
1000
|
|
Blowing pressure
|
kg/cm2
|
35
|
|
Air consuming
|
Itr/min
|
3200
|
|
AIR DRYER
|
Operating pressure
|
kg/cm2
|
2-4
|
|
Temperature
|
|
10-12
|
|
Consuming
|
kcal/hr
|
5400
|
|
Flow rate
|
Itr/min
|
30
|
|
WATER CHILLER
|
Operating pressure
|
kg/cm2
|
2-4
|
|
Temperature
|
|
30
|
|
Consuming
|
kcal/hr
|
39000
|
|
Flow rate
|
Itr/min
|
130
|
|
MACHINE
|
Machine size
|
mm
|
1950-1750-2200
|
|
Machine weight
|
kg
|
2800
|
|
REMARKS
|
1. All data standard infication for 0.6L bottle.
2. The actual output depends on the preform quality and bottle shape.
3. Specifications are subject to change without notice.
4. Please provide the stable ambient temperature.
|
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: automatic and manual.
10). Safereliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low costhigh efficiencyeasy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
Mold
Our mold producing center produces exact mold ,adopts the high grade material to make.
The perform mold inside uses the imported steel, the surface’s brightness is very high and the service time is very long.
The design of equipment is logical, easily operation.
High level automation , using famous imported hydraulic , electrical, sealing parts, the trouble will be less .
No matter what the product ’s outside or inside, they can get the best guarantee, the good products rate can be above 99%.
