Good Supplier Plastic Injection Molding Machine Equipment Manufacturers
Specification For Injection Moulding equipment
1.the machine is of Saving of energy
2.High speed system response and short molding cycle
3.Largely decrease system oil temperature
4.Reduce mold open and close crash to extend service time of machine and mold tool.
5.To extend service life of oil piping system, to reduce maintenance possibilities and save maintenance cost.
6.Higher requirement for hydraulic oil; provides with imported high quality oil strainer.
Pictures For Injection Moulding equipment
The Whole Machine
Mould Details
-Horizontal double-toggle five-hinge hold-in design. It utilizes its own structural features to increase the opening stroke and rod pitch etc. Meanwhile it avoids hurting the mold (small machine) because of inclined mold board due to uneven force caused by dead weight of vertical parts.
-Up/ down double-toggle five-hinge hold-in design (medium and big machines)
-High rigidity, high intensity box style integrated mold board analyzed by finite element reduces the accumulated error caused by the multiple processing and assembly. It thus increases the mold clamping accuracy.
-It applies quantitative automatic lubricating system. It regularly or sequently executes quantitative oil supply to various lubricating points. It is effective and economical.
-Low-pressure mold protection function prevents from mold damage.
-Mold clamping structure has mechanical, electrical and hydraulic triple safety devices. It is used to ensure the staff security.
-It is of high automatic mold adjusting precision. In renewing the mold, it can fulfill self-adjustment of mold clamping force through setting the parameters.
-Quick mold clamping system applies oil-pressure differential circuit. It increases mold clamping speed, reduces the forming cycle.
-High intensity rod plated with hard chrome matches with automatically lubricated copper wire. It is of smooth movement and long life.
Ejector pin applies position transducer control. It brings about the accurate forward and backward positioning
Machine Information For Injection Moulding equipment
1) LCD computer control with big display screen
2) Hydraulic double proportional valve
3) Hard chrome plated high tensile strength steel tie bars
4) Generous space for fitting large moulds
5) Large opening stroke
6) Two position transducers to control Clamping and Injection
7) Four stages of injecting, independent velocity and pressure control
8) Hydraulic mould height adjustment device
9) Screw cold-start prevention device
10) Melt decompression control
11) Screw back pressure control
12) Multiple hydraulic ejection
13) Differential high speed clamping
14) Centralized lubrication system
15) Low pressure mould protection device
16) Mechanical safety interlock
17) Double electrical safety interlock
18) Oil return filter
19) Oil tank with inner stainless steel container
Parametre Technical Standard For Injection Moulding equipment
|
Item
|
Unit
|
Data
|
|
Max. clamping force
|
KN
|
1300
|
|
Max. opening force
|
mm
|
400
|
|
Space between tie bars(V×H)
|
mm
|
420×420
|
|
Mould height(min-max)
|
mm
|
160-440
|
|
Max. daylight
|
mm
|
840
|
|
Ejector force
|
KN
|
31.4
|
|
Ejector stroke
|
mm
|
100
|
|
Ejector quantity
|
|
5
|
|
Screw diameter
|
mm
|
35
|
40
|
45
|
|
Screw L/D ratio
|
L/D
|
24
|
21
|
18.7
|
|
Theoretical shot volume
|
cm3
|
173
|
226
|
286
|
|
Plasticising weight(PS)
|
g
|
158
|
206
|
260
|
|
Injection pressure
|
Mpa
|
235
|
180
|
142
|
|
Theoretical injection rate(PS)
|
g
|
110
|
143
|
181
|
|
Plasticising capacity(PS)
|
g/s
|
13.8
|
19.7
|
27.1
|
|
Screw torque
|
N.m
|
740
|
|
Max. screw rotate speed
|
r/min
|
250
|
|
Injection stroke
|
mm
|
180
|
|
Carriage push force
|
KN
|
55.2
|
|
Pump motor power
|
KW
|
15
|
|
Pump pressure
|
Mpa
|
16
|
|
Heating power
|
KW
|
9.2
|
|
Heating zone
|
|
4
|
|
Size(L×W×H)
|
m
|
4.7×1.25×1.85
|
|
Net weight
|
t
|
4.3
|
|
International designation
|
|
1300-410
|
