Our Service
Installation service
Once you have completed the preparation, our team of fast and professional after-sales service engineers will install the machine at your factory, give you the operating manual and train your staff until they are able to operate the machine well.
The sample service
1.We can send you the video of the running machine.
2.You are welcome to come to visit our factory,and see the machine running.
Customized service
1.We can design the machines according your requirements(materil,power,filling type,the kinds of the bottles,and so on),at the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.
System Introduction: Five Parts
Such as In feeding system, Heating system, Transfer unit, Clamping unit, High pressure air recycle system
ONE --- In feeding system:
The feeding system uses a single channel with fewer sensors for better feed.
TWO --- Heating system:
The preform is heated intensely, and the cooling device and cross-venting protect the preform neck from deformation, improving energy efficiency and heating efficiency.
THREE --- Transfer unit:
The variable pitch device is servo controlled for stable and accurate transfer.
FOUR --- Clamping unit:
The clamping unit is controlled by a servo motor to ensure simultaneous, stable operation and precise positioning.
FIVE --- High pressure air recycle system:
The high-pressure air circulation system saves high pressure on the fuel tank, reduces noise and saves energy.
| Specifications |
| Type |
RM-6000 |
| output |
according to bottle shape |
Max. 6000PCS/H |
| product specification |
bottle body diameter |
20mm-100mm |
| bottle height |
50mm-350mm |
| bottle mouth diameter |
15mm-38mm |
| mold |
cavity |
6cavities |
| mold thickness |
200mm |
| mold effective area |
800*800mm |
| Main power |
power ,voltage |
380v 3Phase /220v 3Phase 50/60HZ |
| Install machine power/actural use power |
68kw/15kw |
| air source |
low pressure air compressor |
2.0m3/min 1.0MPa |
| high pressure air compressor |
3.6m3/min 3.0MPa |
| cold-dry machine |
2.0m3/min 3.0MPa 1set |
| cooling water |
cooling quantity |
15L/min |
| main machine size |
L*W*H |
2808*1958*1920mm/4600kg |
| feeder size |
L*W*H |
2000*950*2480mm/250kg |
|
Feature
ONE --- Save energy :
The preform is heated and blown over separate sections, which saves waiting time per unit. The preform is heated intensely and is heated as a rotary machine to increase the heating efficiency. At the same time, high-pressure air can be saved through the air circulation system for pre-blowing or low-pressure gas supply, saving energy.
TWO --- Save space:
The feeding system is inside the machine and the heating structure saves the preform spacing and saves space.
THREE --- High efficiency:
We have increased production by about 20% and improved overall energy efficiency with low machine energy consumption.
